Duralight - Trane IGN00034

by OneTrip Parts®

This ignitor is the "narrow" style used by Trane and American Standard. The ceramic block on this ignitor is 1-1/4" wide, 1-3/16" deep, and 1/2" thick on the edge without the ridge. There is a locating ridge on the top right corner of the ceramic block when viewed from the wire end. The heating element portion of the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a plug housing that has two "D" shaped plastic prongs and two latching claws on the sides. This connection style was used on many Trane and American Standard furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Trane and American Standard part numbers B340039P01, IGN34, IGN00034, IGN54, and IGN00054.

This part is covered by the exclusive Duralight® two year limited replacement warranty when purchased from an authorized dealer. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight® dealer that you purchased the part from for details.

Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications.

This item is sold for professional installation only in accordance with all local, state, and national codes and licensing requirements.