FURNACEIGNITERS.COM

by OneTrip Parts®

Duralight Furnace Hot Surface Ignitor Direct Replacement For Trane IGN00026 / IGN00030

The Duralight® 760-409B silicon carbide ignitor from OneTrip Parts® replaces virtually all models in the field with a 2" wide ceramic base. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion of the ignitor is 2-1/4" long. The 6" long wire leads come with .096" pins installed and two plug housings are included which snap on to the pins. CAUTION: The pins lock in to the plug housing and can not be removed without a special tool once they are locked in. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or the wire is not long enough.


This ignitor will replace the following models: Carrier / Bryant / Payne LH33ZS001, LH33ZS002, LH33ZS003, and 33ZS004, Ducane 20015201, Norton 201, 271, and 271M, Raypack 600915, Roberts Gordon 90434300, Robertshaw 41-403, 41-407, and 41-409, ICP / Snyder General / Heil / Comfortmaker / Tempstar 1380654, 1380672, and 1380680, Trane / American Standard B138196P01, B144676P02, IGN26, IGN30, IGN00026, and IGN00030, Weil-McLain 511-330-139 and 511-330-193, White-Rodgers 767A-370 and 767A-376.


This part is covered by the exclusive Duralight® two year limited replacement warranty when purchased from an authorized dealer. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight® dealer that you purchased the part from for details.


Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications.


This item is sold for professional installation only in accordance with all local, state, and national codes and licensing requirements.

  • Made in USA
  • OneTrip Parts Two Year Warranty
  • Replaces Virtually all 2" Wide Base Ignitors - .096" Male Pins Factory Installed - Locks Plug On Permanently - Includes Two Snap-on Plugs and Two Hi Temp Ceramic Wire Nuts
  • Replaces Trane American Standard Part Numbers B138196P01, B144676P02, IGN26, IGN30, IGN00026, and IGN00030
  • Also Replaces Carrier / Bryant / Payne LH33ZS001, LH33ZS002, LH33ZS003, and 33ZS004, Ducane 20015201, Norton 201, 271, and 271M, Raypack 600915, Roberts Gordon 90434300, Robertshaw 41-403, 41-407, and 41-409, ICP / Snyder General / Heil / Comfortmaker / Tempstar 1380654, 1380672, and 1380680, Weil-McLain 511-330-139 and 511-330-193, White-Rodgers 767A-370 and 767A-376

Parts for Trane and American Standard Furnaces

 DURALIGHT FURNACE IGNITORS